Brand | Schneider |
Input Phase | 3 - Phase |
Model Name/Number | LXM32CD72N4 |
product certifications | UL TUV CSA |
Width | 108 mm |
maximum leakage current | 30 mA |
response time | <= 5 ms compliment of STO_A, compliment of STO_B |
commissioning port | 2-wire RS485 multidrop for Modbus |
Unit Type of Package 1 | PCE |
Package 1 Weight | 5.507 kg |
discrete input number | 2 safety discrete input(s) 6 logic discrete input(s) |
environmental characteristic | Classes 3C1 conforming to IEC 60721-3-3 |
status LED | 1 LED (red)servo drive voltage |
pollution degree | 2 conforming to EN/IEC 61800-5-1 |
operating position | Vertical +/- 10 degree |
output voltage | <= power supply voltage |
electromagnetic compatibility | Conducted EMC, class A group 1 conforming to EN 55011 Conducted EMC, class A group 2 conforming to E |
shock resistance | 15 gn for 11 ms conforming to EN/IEC 60028-2-27 |
relative humidity | Class 3K3 (5 to 85 %) without condensation conforming to IEC 60721-3-3 |
output current 3s peak | 72 A for 5 s |
electrical isolation | Between power and control |
discrete output logic | Positive or negative (DO) conforming to EN/IEC 61131-2 |
discrete output number | 5 |
depth | 237 mm |
IP degree of protection | IP20 conforming to EN/IEC 60529 IP20 conforming to EN/IEC 61800-5-1 |
Number of Units in Package 1 | 1 |
connector type | RJ45 (labelled CN7) for Modbus |
braking current | 50 mA |
Package 1 Height | 14.5 cm |
Package 1 width | 27.5 cm |
discrete input logic | Positive (compliment of STO_A, compliment of STO_B) at State 0: < 5 V at State 1: > 15 V conforming |
safety function | STO (safe torque off), integrated |
tightening torque | CN8: 0.5 N.m CN1: 0.7 N.m CN10: 0.7 N.m |
discrete input type | Logic (DI terminals) Safety (compliment of STO_A, compliment of STO_B terminals) |
overvoltage category | III |
communication interface | Modbus, integrated |
network number of phases | Three phase |
operating altitude | <= 1000 m without derating > 1000...3000 m with conditions |
line current | 23.5 A 43 % at 380 V, with external line choke of 1 mH 19.5 A 55 % at 480 V, with external line ch |
product or component type | Motion servo drive |
Package 1 Length | 33 cm |
Height | 270 mm |
switching frequency | 8 kHz |
discrete output type | Logic output(s) (DO)24 V DC |
EMC filter | Integrated |
maximum continuous power | 6500 W at 230 V 13000 W at 400 V |
analogue input type | ANA1+/ANA1-, ANA2+/ANA2- analog input: differential +/- 10 V, impedance: >= 20 Ohm, resolution: 14 b |
device short name | LXM32C |
rated supply voltage | 200...240 V - 15...10 % 380...480 V - 15...10 % |
type of cooling | Integrated fan |
absolute accuracy error | < +/- 0.5 % |
safety level | SIL 3 conforming to EN/IEC 61508 PL = e conforming to ISO 13849-1 |
Range of product | Lexium 32 |
format of the drive | Book |
standards | EN/IEC 61800-5-1 EN/IEC 61800-3 |
supply frequency | 50/60 Hz - 5...5 % |
continuous output current | 24 A at 8 kHz |
protection type | Against reverse polarity: inputs signal Against short-circuits: outputs signal |
analogue input number | 2 |
linearity error | < +/- 0.1 % |
transmission rate | 9600, 19200, 38400 bps for bus length of 40 m for Modbus |
net weight | 4.8 kg |
marking | CE |
control signal type | Servo motor encoder feedback Pulse train output (PTO) RS422 <500 kHz <100 m Pulse/direction (P/D) |
network frequency | 47.5...63 Hz |
sampling duration | ANA1+/ANA1-, ANA2+/ANA2-: 0.25 ms analog DI: 0.25 ms discrete |
discrete output voltage | <= 30 V DC |
product compatibility | Servo motor BMH (140 mm, 2 motor stacks) Servo motor BMH (140 mm, 3 motor stacks) Servo motor BMH (1 |
nominal power | 5 kW at 230 V 8 kHz 7 kW at 400 V 8 kHz |
discrete input voltage | 24 V DC for logic 24 V DC for safety |
signalling function | Display of faults 7 segments |
Country of Origin | Made in India |