Brand | Schneider |
Motor Power | 0.18kW to 4kW |
Input Voltage | 200-240 V |
Input Phase | 3 - Phase |
Input Frequency | 50-60 Hz |
Warranty | 12 Months |
Motor RPM | 1400 RPM |
Power Source | Electric |
Current Rating | 4 A |
Country of Origin | Made in India |
Part of Easy Series
IP 20 frequency inverter for three-phase asynchronous motors, specially designed for pump and fan applications in the following market segments: Water & Wastewater, Oil & Gas, building management and energy plant.
Features
Altivar Easy 610 drives are part of the Easy line, the essential automation & control products from a worldwide leader.
When just enough is just right!
Fit for purpose products
Integrated optimized EMC filter and DC choke, anti disturbance and harmonics without options
Just enough I/O ports quantity, flexible integration into automation system
Modbus communication embedded, Profibus DP as option
Easiness
Compact size: simplicity of integration and reduction of the size of the enclosures
Easy and quick installation, wiring and operation with the "Quick start“
User-friendly graphic display terminal: 6 or 20 integrated languages (English, Chinese…) depending on the model
Duplicate the configuration by keypad from one powered-up drive on another powered-up drive
Easy integration on an enclosure door: remote display terminal with a Ø 22mm quick-mounting system
Colored control circuit terminals to avoid misuse
7 pre-programmed function blocks cover 90% of the pump and fan applications
Simply start menu cover the most frequently used parameters
Robustness in any situation (harsh environments...)
Innovative cooling air flow separate from the printed circuit board to avoid dust and oil corrosion
Electronic cards with protective coating
Busbar plating to avoid chemical gas corrosion
Improved insulation level in power part
Operation temperature: - 10…+ 60°C
IP40 protection level on top of the product
Availability
Supported by the service of Schneider Electric, a worldwide leader in automation and control
Wide availability throughout an extensive distribution network
Benefits
Introducing the Easy line, the essential automation & control products from a worldwide leader in automation.
Altivar Easy 610 drives are entry-level products that are perfectly tailored to meet the specific requirements of emerging markets. In other words, they answer to the following challenges: fit for purpose at affordable price with no compromise on easiness, robustness, availability and services.
Applications
Altivar Easy 610 drives have been specifically designed for:
Domains & applications:
Process & machine management / Pump & fan control: Air cooling system fan, Circulating pump, Cooling fan, Draught fan
Building management: Fan, Circulating pump
Market Segments:
Water & Wastewater: intake pump, boosting pump, lifting pump, aeration blower
Oil & Gas: circulating pump, drain pump, oil transfer pump
Brand | Nidec |
Model Name/Number | NE200 & NE300 |
Input Frequency | 45 to 66 Hz |
Enclosure Rating | IP20,NEMA 1 conduit kits available |
Analog Input Resolution | Voltage mode: 11 bits (unipolar) Current mode: 11 bits |
Output Frequency Range | 0 to 550 Hz |
DC Bus Undervoltage Trip | 100 V models: 175 Vdc 200 V models: 175 Vdc 400 V models: 330 Vdc |
Ground Fault Trip | Protects against output phase-to-ground fault |
CE | CE approval |
Altitude | De-rate the continuous output current by 1% for every 100 m (328 ft) above 1000 m (3,280 ft) to a ma |
Over-temperature Trip | Drive heatsink temperature exceeds 95 DegreeC (203 DegreeF) |
Maximum Supply Imbalance | 2% negative phase sequence,3% voltage imbalance between phases |
DC Bus Overvoltage Trip | Frame sizes 1 - 4: 100 V models: 510 Vdc 200 V models: 510 Vdc 400V models: 870 Vdc Frame size 5 - 9 |
EU | These products comply with the Restriction of Hazardous Substances Directive (2011/65/EU),the Low V |
TUV | C300 models only: The Safe Torque Off (STO) function may be used as a safety component of a machine. |
Input Displacement Power Factor | 0.97 |
Drive Overload Trip | Programmable: Default settings: 180% for 3s,150% for 60s |
RCM | RCM Registered supplier No. 12003815281 |
Frequency Resolution | 0.01 Hz |
Storage Temperature | Size 1 - 4: -40 DegreeC to 60 DegreeC (-40 DegreeF to 140 DegreeF) - 24 months Max. Size 5 - 9: -40 DegreeC to 55 DegreeC (-40 DegreeF to 131 Degree |
Cooling Method | Forced convection |
Motor Thermal Trip | Electronically protects the motor from overheating due to loading conditions |
Electromagnetic Capability | IEC/ EN 61800-3 Immunity and Emissions EN 61000-6-2: Immunity for industrial environments EN 61000-6 |
RoHS | Complies with the Restriction of Hazardous Substances Directive (2011/65/EU) |
Vibration | Tested in accordance with IEC 60068-2-64 and IEC 60068-2-6 |
Mechanical Shock | Tested in accordance with IEC 60068-2-27 and IEC 60068-2-29 |
Humidity | 95 % non-condensing at 40 DegreeC (104 DegreeF) |
Frequency Accuracy | +-0.02% of full scale |
Voltage | 100 V models: 100 to 120 Vac +-10% 200 V models: 200 to 240 Vac +-10% 400 V models: 380 to 480 Vac +-10 |
Ambient Operating Temperature | Size 1 - 4: -20 DegreeC to 40 DegreeC (-4 DegreeF to 104 DegreeF) @ 3 kHz switching freq. | Operation to 60 DegreeC (140 DegreeF) with d |
Instantaneous Overcurrent Trip | 220% of rated motor current |
ISO | Manufacturing facilities comply with ISO 9001:2015 and ISO 14001 |
Braking | Dynamic braking transistor included,requires external resistor |
Phase Loss Trip | DC bus ripple threshold exceeded |
Short Circuit Trip | Protects against output phase-to-phase fault |
Switching Frequency | Size 1 - 4: 0.667,1,2,3,4,6,8 12 & 16 kHz Size 5 - 9: 2,3,4,6,8 12 & 16 kHz |
Commander variable speed drives have established the standard of excellence in motor control since 1983 when Control Techniques launched the first world commercial vector drive. Since then, Commander has undergone several successful enhancements, each time bringing new technology and innovations to the world of automation.
The new Commander C series has been designed to be a simple and compact AC motor speed controller that meets advanced requirements for a wide range of applications while optimizing the user experience.
Set just 4 parameters to get your drive started
Plug-in options for advanced control
Dual Safe Torque Off (STO)
Equipped with the latest energy saving features
Up to 180% overload for high torque applications
On board PLC
Straightforward installation and commissioning
Easy motor pairing and performance control
Robust and reliable design
Setting up a drive can require training, specialist knowledge and time.
But Commander C will get you up and running, from out of the box to controlling your motor, in minutes.
Three simple steps will set up your drive for most fan, pump, compressor, conveyor and general purpose applications!
Control Mode
Open loop vector or V / Hz induction motor control ???
Open loop Rotor Flux Control for induction motors (RFC-A)
Applications
Whatever your application, Commander C is the perfect solution across industries
The Commander series are simple and compact AC motor speed controllers that meet advanced requirements in a wide range of applications. Their small footprint – among the smallest in their class – makes them ideal for machine builders and OEMs, where space is at a premium.
motor control of pumps ventilators and compressors with general purpose variable speed drives
Pumping, Ventilating & Compressing
Improved energy efficiency during periods of low demand
On board PLC & PID functionalities make advanced control easy and efficient without the need of an external controller
Skip Frequencies allow users to easily avoid equipment resonant frequencies, reducing high vibration levels
Supply Loss Ride Through will keep the drive up and running through most power disturbances
general purpose drives for accurate remote speed control of conveyor belts
Conveying
Accurate remote speed control with fieldbus communications
S-ramp acceleration / deceleration profiling provides smooth speed transitions minimizing machine jerk
Avoids early wear and tear of the equipment
Overload capacity up to 180%
Control Techniques general purpose drives for lifting hoisting and winching
Lifting, Hoisting & Winching
Adjustable mechanical brake sequencing with torque proving function
Embedded PLC functionality can manage local I/O reducing the need for an external controller
Access control variable speed drives for motion control
Access Control
Smooth motion with enhanced open loop control
Small physical size allows the drive to be mounted easily in smaller enclosures
Highly reliable in harsh environments, providing long lasting service
general purpose drives for stable motor control for processing mixers kneaders agitators extruders
Processing (Mixers, Kneaders, Crushers, Agitators, Centrifuges, Extruders)
Ease of integration to external PLC or other management systems through networking options
Conformal coating for enhanced environmental protection
Overload capacity up to 180%
Highly stable motor control
Control Method | V/F Control |
Power | 3 HP |
Enclosure Type | IP21 |
Usage | For Compressors |
Brand | Delta |
Phase | 3 Phase |
Communication Interface | Ethernet |
*Your information is safe with us.
Control Method | Vector Control |
Power | 3 HP |
Usage | For Industrial Machinery |
Enclosure Type | IP40 |
Brand | Danfoss |
Phase | 3 Phase |
Communication Interface | Profinet |
Control Method | Vector Control |
Power | 3 HP |
Enclosure Type | IP21 |
Usage | For Compressors |
Brand | Delta |
Phase | 3 Phase |
Communication Interface | Profinet |
Control Method | Vector Control |
Power | 3 HP |
Usage | For Compressors |
Enclosure Type | IP21 |
Brand | Delta |
Phase | 3 Phase |
Communication Interface | Profinet |
*Your information is safe with us.
Control Method | PWM |
Power | 5 HP |
Usage | For Fans |
Enclosure Type | IP40 |
Brand | Danfoss |
Communication Interface | Ethernet |
*Your information is safe with us.